Connect The Base And Charge The Handset - Uniden ELITE 8855 Series Owner's Manual

Connect the base and charge the handset

1) Connect the AC adapter to the AC ADAPTER
jack. Place the base close to the AC outlet to
avoid long extension cords.
2) Connect the AC adapter to a continuous
power supply (i.e., an outlet that is not
controlled by a switch).
3) Close the handset and place it in the base
with the smaller LCD screen facing forward.
4) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
5) Charge your handset at least 10 hours before plugging into the phone line.
6) Once the handset battery pack is fully
charged, connect the telephone line cord to
the TEL LINE jack and to a telephone outlet.
High Speed Internet
If your phone line also has High Speed Internet
please ensure you are using an approved line
filter before connecting the telephone cord.
To AC ADAPTER
Australia
Tel Line adapter
(supplied)
[10]
Use only the
!
supplied AAD-
8855 AC
ADAPTER. Do not
use any other AC
adapter.
Do not place the
!
power cord where it
creates a trip
hazard or where it
could become
chafed and create a
fire or electrical
hazard.
Don't place the
!
base in direct
sunlight or subject it
to high
temperatures. The
battery may not
charge properly.
If your telephone
!
outlet isn't modular,
contact your
telephone company.