Using Dvi (Same As Hdmi But Requires An Audio Connection) - Insignia NS-39D310NA15 User Manual

Insignia 39" LED TV

Using DVI (same as HDMI but requires an audio connection)

On your TV
HDMI cable 3.5mm audio
connector connector
HDMI jack
PC AUDIO
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to one of the HDMI jacks on the side of your TV.
5 Connect a 3.5mm RCA stereo audio cable (not provided) to the PC AUDIO IN jack on the back of your TV and to
the AUDIO OUT jacks on the cable or satellite box.
Note
When you connect the audio using the PC AUDIO IN jack, the audio output
is analog.
6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7 Press INPUT to open the INPUT SOURCE list.
8 Press or to highlight HDMI1 or HDMI2, then press ENTER.
14
HDMI cable with
HDMI-DVI adapter
IN jack
Cable or
satellite box
www.insigniaproducts.com
Side of TV
3.5mm RCA stereo audio cable
Back of TV