Table of Contents
Advertisement
Insignia 39" LED TV
Problem
Solution
My TV does not
• Make sure that the INlink
turn on when I
turn on my
device.
• Make sure that TV Auto Power
• The device may not support this
The Audio
• When Audio Receiver is set to
Receiver
setting on the
INLINK menu
keeps turning
back on after it
is turned off.
Two volume
• When you adjust the volume on
bars appear
when adjusting
the volume.
I cannot select
• The device may not support this
the Root Menu
option on the
INLINK menu.
OR
The device's
root menu does
not open when
I select Root
Menu on the
INLINK menu.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your
TV, then turn it on again.
76
feature is turned on. See
"Turning INlink on or
off" on
page 44.
On is set to On on the INLINK
menu. See
"Turning TV Auto
Power On on or
off" on page 45.
feature. See the documentation
that came with the device for
more information.
Off and INlink Control is set to
On and you make an
adjustment to the audio
receiver (for example, turn the
volume knob or press a button),
Audio Receiver is
automatically set to On. To
prevent this from happening,
turn off the INlink feature. See
"Turning INlink on or
off" on
page 44.
the audio receiver or with the
TV remote control, a double
volume bar appears, one for the
TV volume and one for the
audio receiver volume.
feature. See the documentation
that came with the device for
more information.
www.insigniaproducts.com
Advertisement
Table of Contents
