Using Component Video (Better) - Insignia NS-39D310NA15 User Manual

Using component video (better)

Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component Analog
video cable audio cable
connectors connectors
Component Analog
video jacks audio jacks
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the Y/VIDEO, P
the component video out jacks on the cable or satellite box.
4 Connect a RCA audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the audio
out jacks on the cable or satellite TV box.
Notes
• The Y/VIDEO, P
• When you connect the audio using the AUDIO L and R jacks, the audio
5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press or to highlight Component/AV, then press ENTER.
, and P
B R
device) share the AUDIO L and R jacks with the Y/VIDEO jack (used to
connect a composite device).
output is analog.
www.insigniaproducts.com
RCA audio cable
Component video cable
Back of TV
video jacks (used to connect a component
NS-39D310NA15 Insignia 39" LED TV
Cable or
satellite box
, and P jacks on the back of your TV and
B R
15