Table of Contents
Advertisement
Using component video (better)
Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component
Analog audio
video cable
cable
connectors
connectors
Component
Analog
video jacks
audio jacks
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the Y/VIDEO, P
to the COMPONENT OUT jacks on the DVD or Blu-ray player.
3 Connect a RCA audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the L and R
AUDIO OUT jacks on the DVD or Blu-ray player.
Notes
• The Y/VIDEO, P
• When you connect the audio using the AUDIO L and R jacks, the audio
4 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or
to select Component/AV, then press ENTER.
, and P
B
R
device) share the AUDIO L and R jacks with the Y/VIDEO jack (used to
connect a composite device).
output is analog.
www.insigniaproducts.com
RCA audio cable
Component video cable
Back of TV
video jacks (used to connect a component
NS-39D310NA15 Insignia 39" LED TV
DVD or Blu-ray player
, and P
jacks on the back of your TV and
B
R
21
Advertisement
Table of Contents
