Dvi (Same As Hdmi But Requires An Audio Connection) - Insignia NS-40D510MX15 User Manual

Insignia 40" LED TV

DVI (same as HDMI but requires an audio connection)

Note
You must use the HDMI 1/ARC/DVI jack to connect a cable or satellite box
using DVI. If you use another HDMI jack, you will not hear sound from the TV
speakers.
On your TV
HDMI cable Audio cable
connector connector
HDMI 1/
ARC/DVI
AUDIO IN
jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to the HDMI 1/ARC/DVI jack on the side of your TV.
5 Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO
OUT jacks on the cable or satellite box.
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio
output is analog.
6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7 Press INPUT to open the INPUT SOURCE list.
8 Press or to highlight HDMI 1, then press ENTER.
14
PC/DVI
jack
www.insigniaproducts.com
Side of TV
Back of TV
Cable or
satellite box
HDMI cable with
HDMI-DVI adapter
Audio cable