Adjusting Your Hard Disk Setting - AOpen AX4SG Max II Manual

Adjusting your Hard Disk Setting

Except its original 2 sets of parallel IDE, this motherboard supports the latest
serial ATA hard disk. If you are unable to find your newly installed serial ATA hard
disks on your operating system after having them installed, the problem may lie
in the BIOS setting. You can simply adjust BIOS settings to have them work
properly.
After installing your hard disks properly, you can directly go to BIOS setting
screen for adjustment. Simply pressing "Integrated Peripherals OnChip
IDE Device On-Chip Serial ATA" to choose your preferable mode. If you
have no intention of changing its original setting, the default would be Auto.
18