Table 11: Account Settings - Grandstream Networks HT701 User Manual

Primari RADIUS Acct
Port
Primary RADIUS
Server Secret
Secondary RADIUS
Server
Secondary RADIUS
Auth Port
Secondary RADIUS
Acct Port
Secondary RADIUS
Server Secret
RADIUS Timeout
RADIUS Retry
Download Device
Configuration
Upload Firmware
Profile/Account Active
Primary SIP Server
Failover SIP Server
Prefer Primary SIP
Server
Outbound Proxy
FIRMWARE VERSION 1.0.3.1
Default is 1813. Specifies the port to be used for the Primary RADIUS Account. HT704
Only
Specifies the secret string to be used to authenticate the RADIUS connection to the
Primary Server. It should match RADIUS configuration. HT704 Only
Set the IP or FQDN of the Secondary RADIUS Server. HT704 Only
In case Primary Radius server becomes unusable, secondary will take role of primary and
will manage credit recourses in the network
Default is 1812. Specifies the port to be used for the Secondary RADIUS Authentication.
HT704 Only
Default is 1813. Specifies the port to be used for the Secondary RADIUS Account. HT704
Only
Specifies the secret string to be used to authenticate the RADIUS connection to the
Secondary Server. It should match RADIUS configuration HT704 Only
Default is 2. HT704 Only
Default is 3. HT704 Only
Allows user to download and save a text file containing all the P values of each setting as
configured at that point on the unit. (Note: For Security Reasons, all Passwords won't be
Downloaded)
Allows the user to upgrade the firmware with a single firmware file by browsing and
loading the file from your computer (local directory).

TABLE 11: ACCOUNT SETTINGS

When set to Yes the FXS port or Profile (for HT704) is activated.
SIP Server's IP address or Domain name provided by VoIP service provider.
Failover SIP Server's IP address or Domain name in case primary server does not
respond.
Default is No. If set to yes, it will register to Primary Server if registration with Failover
server expires
IP address or Domain name of Outbound Proxy, or Media Gateway, or Session Border
Controller. Used by HT70X for firewall or NAT penetration in different network
HT70X USER MANUAL Page 35 of 52