Setting Up Wlan Access; Further Information On Wlan And Bluetooth; Access Via Umts; Access Via Wireless Wan - Fujitsu STYLISTIC Q584 Operating Manual

Setting up WLAN access

• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.

Further information on WLAN and Bluetooth

For further information about WLAN or Bluetooth, see "Appendix: Miscellaneous Information".
For WLAN specifications, see chapter

Access via UMTS

If you ordered an integrated UMTS module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional UMTS module is ready for use immediately.
You will find information on establishing the connection with the UMTS network
in the documentation for the hardware used.
Your device can connect to the Internet via UMTS. To do this, use one of
the following types of connection:
• Integrated UMTS module (availability dependent on your configuration)
a USB dongle (a USB stick with your mobile phone provider's SIM card)
•
• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)

Access via Wireless WAN

You can purchase the accessories for Wireless WAN reception from your Fujitsu dealer.
If you have ordered a Wireless WAN module, your device will already
be prepared when you receive it.
You will find information on establishing the connection with the Wireless WAN
network in the documentation for the hardware you plan to use.
Fujitsu
"WLAN specifications", Page
Working with the Tablet PC
79.
41