Initial Cleaning; First Connection To The Mains; Setting The Time Of Day; Daily Use - AEG BP5304001 User Manual

Hide thumbs Also See for BP5304001:
Table of Contents

Advertisement

8

Daily use

Initial Cleaning

• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".

First connection to the mains

After first connection to the mains all symbols in the display are on for some seconds. For
the subsequent few seconds the display shows software version.

Setting the time of day

After the software version goes off, the display shows
1. Press
2. Press
automatically after 5 seconds).
The display shows
3. Press
4. Press
automatically after 5 seconds) .
The Temperature/Time display shows new time.
Changing the time of day
You can change the time of day only if the oven is off.
Press
. The set time and symbol
"Setting the time of day".
DAILY USE
WARNING!
Refer to "Safety information" chapter.
To use the appliance, press the control knob. The control knob comes out.

Activating and deactivating the appliance

1. Turn the oven functions control knob to select an oven function.
2. Turn the temperature control knob
3. To deactivate the appliance turn the oven functions control knob to off position
("0") .

Oven Functions

or
to set current hour.
to confirm (necessary only for first the setting, later new time will be saved
and set hour. " 00 " flashes.
or
to set current minutes.
to confirm (necessary only for first the setting, later new time will be saved
Oven function
Rapid Heat-up
flash in the display. To set new time use the procedure
/
to set a temperature.
To decreases the heat-up time.
and " 12:00 ". " 12 " flashes.
Application

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents