Installation - AEG BP5304001 User Manual

Problem
The display shows C2
The display shows F2
The display shows an error code
that is not in this list
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

WARNING!
Refer to "Safety information" chapter.
The built-in unit must meet the stability requirements of DIN 68930.
Possible cause
You want to start the pyrolytic
cleaning or defrost function
but you did not remove food
sensor plug from the socket.
• The door is not closed cor-
rectly
• The door lock is defect
There is an electronic fault
Installation
Solution
Remove the food sensor plug
from the socket
• Close the door correctly
• Switch off the appliance
with the house fuse or the
safety switch in the fuse box
and switch it on again
• If the display shows F2 again,
refer to the Customer Care
Department
• Switch off the appliance
with the house fuse or the
safety switch in the fuse box
and switch it on again
• If the display shows the error
code again, refer to the Cus-
tomer Care Department
.........................................
.........................................
.........................................
29