Performing A Wash Cycle; Brief Guide - Electrolux EW 1477 F User Manual

Performing a wash cycle

Brief guide

A wash cycle consists of the following steps:
1. Switch on the appliance by pressing the Q (ON/
OFF) button.
2. Set the desired wash programme:
– Set the programme and temperature using the
programme selector
– Select additional programme option(s) if
required
3. Change the spin speed/ opress RINSE HOLD as
necessary.
X
4. Set the (DELAY TIMER) as required.
5. Open the loading door and load the washing.
6. Close the loading door.
7. Add detergent/additives.
8. Start the wash programme by pressing the
(START/PAUSE) button.
After the wash programme has finished:
Important: If the wash cycle finishes with o (Rinse
hold), perform a D (PUMP) or F (SPIN) cycle before
opening the loading door.
9. Open the door and remove the washing.
10.Turn the programme selector to Ï.
11.Switch off the appliance by pressing the Q (ON/
OFF) button.
14
U