Changing A Wash Programme; Wash Cycle Complete/Removing The Washing - Electrolux EW 1477 F User Manual

Changing a wash programme

Changing or cancelling a programme
U
1. Press the (START/PAUSE) button.
2. Turn the programme selector to Ï. The wash pro-
gramme has been cancelled.
3. If required, set a new wash programme and press
U
the (START/PAUSE) button again.
Otherwise, turn the programme selector to D
(PUMP) or F (SPIN) and press the
PAUSE) button. (The water will be drained, or the
washing will be spun.)
The wash programme can be temporarily
3
interrupted at any time by pressing the
(START/PAUSE) button, and then re-started
by pressing the button again. The wash pro-
gramme is only able to be changed after
having turned the programme selector to Ï.
Selecting an additional programme
option
The additional programme options
È
BIO or (EXTRA RINSE) can still be selected after
the programme has started if they are able to be
combined with the wash programme selected.
U
1. Press the (START/PAUSE) button.
B
2. Press the (SHORT) or BIO or
RINSE) button.
U
3. Press the (START/PAUSE) button again. The
wash programme will commence.

Wash cycle complete/removing the washing

Once a wash programme has come to an end,
(END) will illuminate in the programme progress dis-
play.
o
If (RINSE HOLD) was selected, the display above
U
the (START/PAUSE) button will flash.
1. After a rinse hold the water must first be drained:
U
– Either press the
(water will be drained and the washing spun in
accordance with the programme that has fin-
ished; after pressing the
button again the spin speed can be changed
even during the spin cycle),
or
– first turn the programme selector to Ï
Then turn the programme selector to D
(PUMP). Press the
(water will be drained without the spin cycle),
or
– first turn the programme selector to Ï
Then turn the programme selector to F (SPIN)
and select the desired spin speed. Press the
U
(START/PAUSE) button (water will be
drained and the washing spun).
20
U
(START/
B
(SHORT) or
È
(EXTRA
(START/PAUSE) button
U
(START/PAUSE)
.
U
(START/PAUSE) button
.
Changing the spin speed
The spin speed can be changed and
HOLD) can be set during the wash programme.
U
1. Press the
2. Change the spin speed by pressing the K (SPIN)
button, or press the
U
3. Press the
wash programme will commence.
U
C
After this step of the programme has come to an
C
end, (END) will illuminate in the programme
progress display.
2. Open the loading door.
As soon as the door indicator has gone out, the
loading door can be opened.
3. Remove the washing.
4. Turn the programme selector to Ï
5. Switch off the appliance by pressing the Q (ON/
OFF) button.
6. Turn off the tap.
7. After the wash, slightly pull out the detergent
drawer to allow it to dry. Leave the loading door
slightly open to allow the inside of the washing
machine to air.
Important: If the washing machine will not be used
for a longer period of time: Turn off the tap and dis-
connect the washing machine from the mains.
(START/PAUSE) button.
o
(RINSE HOLD) button.
(START/PAUSE) button again. The
.
o
(RINSE