Technical Data; Environment Concerns; Installation - Electrolux ESF 66860 User Manual

Technical data

Dimensions
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of the
appliance door shows the electrical con-
nection data.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,

Environment concerns

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which

Installation

Installation under a counter
Put the appliance adjacent to a water tap and
a water drain.
Remove the appliance worktop to install it
under a sink unit or a kitchen worktop.
Make sure that the dimensions of the recess
agree with the dimensions in the picture.
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
Place settings
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Recycle the materials with the symbol
Put the packaging in applicable containers to
recycle it.
How to remove the appliance worktop
1. Remove the rear screws (1).
photovoltaic panels and aeolian), use a
hot water supply to decrease energy
consumption.
electrolux 15
596 mm
850 mm
620 mm
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
maximum 60 °C
12
.