Use Of Dishwasher Salt - Electrolux ESF 66860 User Manual

Equivalent scales measure the water hard-
ness:
• German degrees (dH°).
• French degrees (°TH).
• mmol/l (millimol for each litre - international
unit for the hardness of water).
Water hardness
°dH °TH
51 - 70 91 - 125
43 - 50 76 - 90
37 - 42 65 - 75
29 - 36 51 - 64
23 - 28 40 - 50
19 - 22 33 - 39
15 - 18 26 - 32
11 - 14 19 - 25
4 - 10 7 - 18
< 4 < 7
1) Factory position.
2) No use of salt is necessary.
You must adjust the water softener man-
ually and electronically.
Manual adjustment
Turn the water hardness dial to the position
1 or 2 (refer to the chart).
Electronic adjustment
1. Switch on the appliance.
2. Make sure that the appliance is in setting
mode.
3. Press and hold function buttons B and C
until the indicator lights of function but-
tons A, B and C start to flash.

Use of dishwasher salt

Do these steps to fill the salt container:
mmol/l Clarke
9,1 - 12,5 64 - 88
7,6 - 9,0 53 - 63
6,5 - 7,5 46 - 52
5,1 - 6,4 36 - 45
4,0 - 5,0 28 - 35
3,3 - 3,9 23 - 27
2,6 - 3,2 18 - 22
1,9 - 2,5 13 - 17
0,7 - 1,8 5 - 12
< 0,7 < 5
• Clarke degrees.
Adjust the water softener to the water hard-
ness in your area. If necessary, contact your
local water authority.
Water hardness adjustment
manually
1)
2
1)
2
1)
2
1)
2
1)
2
1)
2
1
1
1
2)
1
4. Release function buttons B and C.
5. Press function button A.
– The indicator lights for function buttons
B and C go off.
– The indicator light for function button A
continues to flash.
– The display shows the current adjust-
ment.
Example: the display shows
5.
6. Press the function button A again and
again until the display shows the neces-
sary adjustment.
7. Press the on/off button to keep the op-
eration.
If the water softener is set electronically
to the level 1, the salt indicator light stays
off.
1. Turn the cap counterclockwise to open
the salt container.
electrolux 7
electronically
10
9
8
7
6
1)
5
4
3
2
2)
1
= level