Qomo Hite Vision User Manual page 16

QOMO Hite Vision Interactive Whiteboard User Manual
connected and will work normally.
Step 3：Adjust the projection angle and make sure the projection area is
within the whiteboard display area.
Step 4：Left click on the whiteboard program icon at the bottom right of the
screen and you will see the following：
Click "Calibrate" and the calibration screen will be displayed：
Step 5：Follow the directions that are given on the board. Touch the center
of the flashing "十" with the interactive whiteboard pen tip or your finger. A
15
© Copyright 2012 QOMO HiteVision, LLC. All Rights Reserved