Interactive System Building - Qomo Hite Vision User Manual

V．Interactive System Building
1. Make sure the whiteboard is firmly fixed before building the interactive
system.
2. Adjust the positions of the projector and whiteboard to make sure the
images are projected to writing area of the whiteboard in full screen
mode.
3. One corner of the whiteboard is set with a USB port (position of the USB
port will be varied in different models). Plug the USB cable into the USB
port. The USB cable in the accessory box is designed for this whiteboard.
Note: A normal USB cable might not be compatible to this whiteboard.
4. Connect the USB cable to the USB port in the computer.
5. Connect the computer and the projector (refer to the projector's User
Manual for more details).
© Copyright 2012 QOMO HiteVision, LLC. All Rights Reserved
QOMO Hite Vision Interactive Whiteboard User Manual
12