Error Displays - Clarion NX509E Owner's Manual & Installation Instructions

USB Devices
Problem
USB device cannot
be inserted.
USB device is not
recognized.
No sound heard with
the display "No File"
shown.
Sound skips or is
noisy.
The iPod's video
image is disturbed.

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD Player
Display
Error 2
Error 3
Error 6
Parental Violation
Wrong Region
DRM
Not Support
56
Cause
The USB device has been
inserted with wrong
direction.
The USB connector is
broken.
The USB device is
damaged.
Connectors are loose.
No MP3/WMA/AAC file is
stored in the USB device.
MP3/WMA/AAC files are
not encoded properly.
The TV Signal setting of
the iPod is not set correctly.
Cause
A disc is caught inside the
DVD player and is not
ejected.
A disc cannot be played
due to scratches, etc.
A disc is loaded upside-
down inside the DVD
player and does not play.
No MP3/WMA/AAC/DivX
file is recorded on the disc.
Parental level error
Region code error
WMA files protected by
DRM are played.
Files not supported by this
unit are played.
Measure
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
different USB device.
Store these files properly in the USB device.
Use MP3/WMA/AAC files encoded properly.
Set the TV Signal setting (NTSC/PAL) of the iPod
correctly.
Measure
This is a failure of DVD player's mechanism.
Consult your store of purchase.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload it properly.
Write these files properly onto a disc.
Set the correct Parental level.
Eject the disc, and replace correct region code
disc.
Perform the operation such as skipping a file.
(Repeat and random playback mode may be
canceled.)