Outline Of Button And Touchkey Operation - Clarion NX509E Owner's Manual & Installation Instructions

Outline of Button and Touchkey Operation

Turning the power on
System check
The CeNET format utilized on this unit is provided
with a system check function. When the system
check function is performed under the following
conditions, the power is automatically turned off.
Once turn off the engine switch, then restart the
engine again.
• When power is first turned on after initial
installation.
• When an external device is connected or
disconnected.
• When Reset button is pressed.
* In addition to the above conditions, the system
check function can be performed from the System
tab menu on the General screen.
Note:
*1 These images indicate the buttons to press or
keys to touch.
8
NX509E
You can change the media sources.
Engine ON
position
*1