Selecting A Media Source - Clarion NX509E Owner's Manual & Installation Instructions

Selecting a Media Source

Changing the source mode
1. Press the [SRC] button to display the Source
screen.
2. Touch the desired Source key you wish to
change to.
The system is switched to the corresponding
source media mode.
Available media sources
Source Corresponding
mode source media
Tuner mode Tuner mode
1
DVD mode* DVD Video mode
CDDA mode
MP3/WMA/AAC
mode
DivX mode
2
USB mode* iPod mode
USB Memory mode
AUX mode AUX mode
Navi mode Navi mode
*1:The source media mode to be selected differs
depending on the data format of the disc set
in the DVD player. When no disc is set, "No
Disc" will be displayed.
*2:The source media mode to be selected differs
depending on the type of the USB media
device connected. When no USB media
device is connected, "No Media" will be
displayed.
Note:
• When the USB mode is selected, video images
input from the AUX1 terminal will be output to the
rear monitor. This is normal.
20
Refer to
mode
page 22
page 26
page 33
page 34
page 37
page 40
page 44
page 46
page 45