Before Operating; Getting Started; Clock Setting; Stop/Clear - Sharp R-582D Operation Manual

Before Operating

* This oven is preset with the OPERATION GUIDE in English.
To assist you in programming your oven, the operation guide will appear in the display.
In this manual, the display of operation guide is abbreviated.
* You can get operation guide in English, Malay or Russian.
To change the language, see page E-22.

Getting Started

Step
Procedure
Plug the oven into a power point.
1
Ensure the oven door is closed.
Press the STOP/CLEAR pad so that the
oven beeps.
2

Clock Setting

* To enter the present time of day e.g. 11:34 (AM or PM):
Step Procedure
Press the CLOCK pad.
1
Enter the correct time of day by pressing
the numbers in sequence.
2
Press the CLOCK pad again.
3
This is a 12 hour clock. If you attempt to enter an incorrect clock time (Ex. 13:45), ERROR will appear
in the display. Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1:45).
The clock of the oven works based on the frequency of power source. So it may gain or lose in some
area where the frequency varies. It is recommended that you should adjust the time occasionally.
If you wish to know the time of day during the cooking mode, press the CLOCK pad. As long as your
finger is pressing the CLOCK pad, the time of day will be displayed.

Stop/Clear

Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.
Pad Order
Pad Order
E – 5
Display
SHARP MICRO-WAVE
OVEN will be displayed
repeatedly.
:
Only the dots will remain.
Display
: 0
The dots (:) will flash on
and off.
1 1 : 3 4
1 1 : 3 4