Sequence Cooking; Instant Cook - Sharp R-582D Operation Manual

Sequence Cooking

Your oven can be programmed for up to 3 cooking sequences, switching from one variable power setting
to another automatically.
* Suppose you want to cook for 10 minutes on 50% (MEDIUM POWER) followed by 5 minutes on
100% (HIGH POWER):
Step Procedure
Enter desired cooking time.
1
Select power level by pressing the
POWER LEVEL pad as required. (for
2
50% press three times)
For second sequence, enter desired
cooking time.
3
(If power is not selected the oven will
operate at 100%).
Press the INSTANT COOK/START pad.
4

Instant Cook™

For your convenience Sharp's Instant Cook allows you to easily cook for one minute on 100% (HIGH
POWER).
Step
Procedure
Press the INSTANT COOK/START pad.
(Within 3 minutes of closing the door.)
1
Press the INSTANT COOK/START pad until desired time is displayed.
Each time the pad is pressed during cooking, the cooking time is increased by 1 minute.
Pad Order
x 3
Pad Order
E – 8
Display
1 0 0 0
COOK will flash on and off.
5 0 %
5 0 0
1 0 0 0
The timer begins to count
down.
When it reaches zero,
5 0 0
the second sequence will
appear and the timer will
begin to count down again.
Display
1 0 0
The timer begins to count
down.