SMC Networks EZ Switch SMCFS1601P User Manual page 7

I C
NDUSTRY ANADA
This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled "Digital Apparatus," ICES-003 of the Department of
Communications.Cet appareil numérique respecte les limites de bruits
radioélectriques applicables aux appareils numériques de Classe A prescrites
dans la norme sur le matériel brouilleur: "Appareils Numériques," NMB-003
édictée par le ministère des Communications.
P
LEASE READ THE FOLLOWING SAFETY INFORMATION CAREFULLY BEFORE
INSTALLING THE
ARNING: Installation and removal of the unit must be carried out by qualified
W
personnel only.
This guide is intended for use by network administrators who are
◆
responsible for setting up and installing network equipment; consequently it
assumes a basic working knowledge of LANs (Local Area Networks).
The unit must be connected to an earthed (grounded) outlet to comply with
◆
international safety standards.
Do not connect unit to an A.C outlet (power supply) without an earth
◆
(ground) connection.
The appliance coupler (the connector to the unit and not the wall plug)
◆
must have a configuration for mating with an EN 60320/IEC 320 appliance
inlet.
The socket outlet must be near to the unit and easily accessible. You can
◆
only remove power from the unit by disconnecting the power cord from the
outlet.
This unit operates under SELV (Safety Extra Low Voltage) conditions
◆
according to IEC 60950. The conditions are only maintained if the
equipment to which it is connected also operates under SELV conditions.
- C A
LASS
S :
WITCH
C
OMPLIANCES AND
– 7 –
S S
AFETY TATEMENTS