Setting The Clock (Remote Control Only) - Sharp DK-KP95PH Operation Manual

Using the Radio Data System
(RDS) (continued)
TRAVEL
Features and programmes concerned
with travel to near and far destinations,
package tours and travel ideas
and opportunities. Not for use for
announcements about problems,
delays, or roadworks affecting
immediate travel where TP/TA should
be used.
LEISURE
Programmes concerned with
recreational activities in which the
listener might participate. Examples
include, Gardening, Fishing, Antique
collecting, Cooking, Food & Wine, etc.
JAZZ Polyphonic, syncopated music
characterised by improvisation.
COUNTRY
Songs which originate from, or continue
the musical tradition of the American
Southern States. Characterised by a
straightforward melody and narrative
story line.
NATION M Current Popular Music of the Nation or
Region in that country's language, as
opposed to International "Pop" which
is usually US or UK inspired and in
English.
OLDIES
Music from the so-called "golden age"
of popular music.
FOLK M Music which has its roots in the musical
culture of a particular nation, usually
played on acoustic instruments. The
narrative or story may be based on
historical events or people.
DOCUMENT Programme concerned with factual
matters, presented in an investigative
style.
TEST Broadcast when testing emergency
broadcast equipment or receivers.
ALARM! Emergency announcement made under
exceptional circumstances to give
warning of events causing danger of a
general nature.
NONE
No programme type (receive only).
TP Broadcasts which carry traffic
announcements.
TA Traffic announcements are being
broadcast.
Setting the clock (Remote control
only)
In this example, the clock is set for the 24-hour (0:00)
display.
�
Press the ON/STAND-BY button to turn the power
on.
�
Press the CLOCK/TIMER button.
3�
Within 5 seconds, press the ENTER button. To adjust
the day, press the
ENTER button.
�
Press the or
display and then press the ENTER button.
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
5�
To adjust the hour, press the
press the ENTER button. Press the
once to advance the time by 1 hour. Hold it down to
advance continuously.
6�
To adjust the minutes, press the
then press the ENTER button. Press the
button once to advance the time by 1 minute. Hold it
down to advance the time by 5 minutes interval.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in
again or after a power failure, reset the clock.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "Clock"
does not appear in step 2, step 4 (for selecting the 24-
hour or 12-hour display) will be skipped.
To change the -hour or -hour display:
�
Clear all the programmed contents. [Refer to "Factory
reset, clearing all memory" on page 20 for details.]
�
Perform "Setting the clock" from step 1 onwards.
6
or button and then press the
button to select 24-hour or 12-hour
or button and then
or
or button and
button
or