Table of Contents
Advertisement
Listening to USB mass storage device/MP3 player (continued)
To play back USB/MP3 player with folder
■
mode on
�
Press the CD/USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
�
Press the FOLDER button, and press the PRESET (
or ) button to select desired playback folder. To start
playback with folder mode on, go to step 4. To change
the playback folder, press the PRESET ( or ) button
to select another folder.
3�
Select desired file to be played back by pressing the
or
button.
�
Press the / (USB / ) button. Playback will start and
the file name will be displayed.
Title, Artist and Album name are displayed if they are
●
recorded in the USB memory device.
Display content can be changed by pressing the
●
DISPLAY button.
To remove USB memory device
■
�
Press the
(USB ) button to stop playback.
�
Disconnect USB memory device from the USB terminal.
Advanced USB playback
The following functions are the same as CD operations:
Direct track search ...................................................... 0
Repeat play .................................................................. 0
Random play (shuffle) ................................................. 0
Programmed play (MP3/WMA)................................... 0
Note:
If USB memory device is not connected, "USB No Media"
will be shown on the display.
Notes:
This unit only supports "MPEG-1 Audio Layer-3"
●
format. (Sampling Frequency is 32, 44.1, 48kHz)
Playback order for MP3 files may differ depending on
●
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps,
●
WMA is 64~160 kbps.
For MP3/WMA files, please put ".MP3" ".WMA" extension.
●
Files cannot be played back if there is no MP3/WMA
extension.
Playlists are not supported on this unit.
●
This unit can display Folder Name or File Name up to
●
32 characters.
Notes:
SHARP will not be held liable for the loss of data while the
●
USB memory device is connected to the audio system.
Files compressed in MP3 and/or WMA format can be
●
played back when connected to the USB terminal.
This USB memory's format supports FAT 16 or FAT 32.
●
SHARP cannot guarantee that all USB memory
●
devices will work on this audio system.
USB cable is not recommended for use in this audio
●
system to connect to USB memory device. Use of the USB
cable will affect the performance of this audio system.
iPod, iPhone and iPad is not prone to this condition.
This USB memory cannot be operated via USB hub.
●
The USB terminal in this unit is not intended for a PC
●
connection but is used for music streaming with a
USB memory device.
External HDD-storage cannot be played back via USB
●
terminal.
If the data inside the USB memory is large, it may take
●
longer time for the data to be read.
This product can play WMA and MP3 files. It will
●
automatically detect the file type being played. If
unplayable file is played on this product, "Not Support"
is indicated and the file will be automatically skipped.
This will take a few seconds. If abnormal indications
appear on the display due to the unspecified file, turn
off the unit and then turn it on again.
This product relates to USB mass storage devices and
●
MP3 players. It may however face some irregularities due
to various unforeseen reasons from some devices. Should
this happen, turn off the unit and then turn it on again.
During CD function, MP3 player will not be charging.
●
Maximum total number of MP3/WMA files is 65025.
●
Total number of folders read is 999 including folder
Page
●
with non-playable file. However, the display shows
only folder with MP3 files.
The display playback time may not be displayed
●
correctly when playing back a variable bitrate file.
The ID3TAG information supported are TITLE, ARTIST
●
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
WMA meta tag also supports title, artist and album
●
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
Advertisement
Table of Contents
