Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes
for product improvement without prior notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
General
■
Power source
AC 220 - 240 V ~ 50/60 Hz
Power
Power on: 26 W
consumption
Power stand-by: 0.4 W (*)
Speaker
1-way speaker system
Speaker: 6.5 cm (2-1/2")
Speaker
50 W/channel
maximum input
power
Speaker rated
25 W/channel
input power
Dimensions
Width: 475 mm (18 - 11/16")
Height: 191 mm (7 - 1/2")
Depth: 83 mm (3 - 1/4")
Weight
2.7 kg (5.9 lbs.)
( * ) This power consumption value is obtained when the
Network Stand-by (demonstration) mode is cancelled
in the power stand-by mode. Refer to page 3 to cancel
the Network Stand-by (demonstration) mode.
Amplifier
■
Output power
RMS: 50 W (25 W + 25 W)
(10% T.H.D.)
RMS: 40 W (20 W + 20 W)
(1% T.H.D.)
Output terminals Headphones: 16 ohms
(recommended: 32 ohms)
Input terminals
Audio In (audio signal):
500 mV/47 k ohms
CD player
■
Type
Single disc multi-play compact disc
player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
D/A converter
Multi bit D/A converter
Frequency
20 - 20,000 Hz
response
Dynamic range
90 dB (1 kHz)
USB (MP3 / WMA)
■
USB host
interface
Support file
Bitrate support
Other
File system
support
Tuner
■
Frequency range FM: 87.5 - 108.0 MHz
Preset
Complies with USB 1.1 (Full
●
Speed)/2.0
Mass
Class.
Support Bulk only and CBI
●
protocol.
MPEG 1 Layer 3
●
WMA (Non DRM)
●
MP3 (32 ~ 320 kbps)
●
WMA (64 ~ 160 kbps)
●
Maximum total number of MP3/
●
WMA files is 65025.
Maximum
total
number
●
folders is 999 INCLUSIVE of root
directory.
The ID3TAG information supported
●
are TITLE, ARTIST and ALBUM
only.
Supports ID3TAG version 1 and
●
version 2.
Support
USB
devices
●
Microsoft
Windows/DOS/FAT
12/FAT 16/ FAT 32.
2 kbyte block length for sector.
●
AM: 522 - 1,620 kHz
40 (FM and AM station)
Storage
of
with