Floppy Drive; Removing A Floppy Drive - Dell DIMENSION 3000 SYSTEMS DMC Owner's Manual

Floppy Drive

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
1
Follow the procedures in "Before You Begin" on page 43.
2
Release and remove the front panel (see page 58).
NOTE:
If you are adding a floppy drive, see "Installing a Floppy Drive" on page 70.

Removing a Floppy Drive

1
Disconnect the power and data cables from the back of the floppy drive and from the system
board (see page 51).
data cable
2
Remove the floppy drive bracket from the computer:
Remove the bracket-securing screw for the floppy drive.
a
Remove the bracket for the floppy drive from the computer.
b
power cable
Removing and Installing Parts
69