Resolving Software And Hardware Incompatibilities - Dell DIMENSION 3000 SYSTEMS DMC Owner's Manual

4
On the next screen, click Confirm.
The restore process takes approximately 6–10 minutes to complete.
5
When prompted, click Finish to reboot the computer.
NOTE:
Do not manually shut down the computer. Click Finish and let the computer completely reboot.
6
When prompted, click Yes.
The computer restarts. Because the computer is restored to its original operating state, the
screens that appear, such as the End User License Agreement, are the same ones that
appeared the first time the computer was turned on.
7
Click Next.
The System Restore screen appears and the computer restarts.
8
After the computer restarts, click OK.
Enabling System Restore
If you reinstall Windows XP with less than 200 MB of free hard-disk space available, System
Restore is automatically disabled. To see if System Restore is enabled:
1
Click the Start button and click Control Panel.
2
Click Performance and Maintenance.
3
Click System.
4
Click the System Restore tab.
5
Ensure that Turn off System Restore is unchecked.

Resolving Software and Hardware Incompatibilities

If a device is either not detected during the operating system setup or is detected but incorrectly
configured, you can use the Hardware Troubleshooter to resolve the incompatibility.
To resolve incompatibilities using the Hardware Troubleshooter:
1
Click the Start button and click Help and Support.
2
Type
hardware troubleshooter
3
Click Hardware Troubleshooter in the Search Results list.
4
In the Hardware Troubleshooter list, click I need to resolve a hardware conflict on my
computer, and click Next.
42
Advanced Troubleshooting
in the Search field and click the arrow to start the search.