Dell DIMENSION 3000 SYSTEMS DMC Owner's Manual page 75

NOTICE:
Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").
6
Connect the power cable to the system board (see page 51).
7
Locate the data cable from the CD or DVD drive in the upper drive bay and connect its
middle data connector to the new drive.
power cable
8
Reattach the front panel (see page 61).
9
Replace the computer cover (see page 77).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into
the computer.
10
Connect your computer and devices to electrical outlets, and then turn them on.
11
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
first CD/DVD
connector
(primary drive)
second CD/DVD
connector (secondary
drive)
Removing and Installing Parts
75