Dell DIMENSION 3000 SYSTEMS DMC Owner's Manual page 54

8
To insert a module, press out the securing clip at each end of the memory module connector.
9
Align the notch on the bottom of the module with the crossbar in the connector.
NOTICE:
10
Insert the module straight down into the connector, ensuring that it fits into the vertical
guides at each end of the connector. Press firmly on the ends of the module until it snaps into
place.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the
module.
54
Removing and Installing Parts
memory module
cutouts (2)
To avoid breaking the memory module, do not press near the middle of the module.
memory connector closest
to microprocessor
securing clips (2)
connector
notch
crossbar