JVC BD-X201MS Safety Precautions page 9

Recommended separation distance between portable and mobile RF commu-
nications equipment and the Model BD-X201MS
The Model BD-X201MS is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled.
The customer or the user of the Model BD-X201MS can help prevent electromagnetic interference by maintaining a minimum dis-
tance between portable and mobile RF communications equipment (transmitters) and the Model BD-X201MS as recommended
below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can
be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of
the transmitter in watt (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz 80 MHz to 800 MHz
d =1.2 V
0.12
0.38
1.2
3.8
12
SAFETY PRECAUTIONS
d =1.2 V
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
d =2.3 V
0.23
0.73
2.3
7.3
23
9