GAI-Tronics L3149B Manual page 69

Model L3149B C200 Advanced Desk Set
Emergency Ack Enable
This parameter enables/disables the generation of MDC1200 emergency, status and message
acknowledgments. If enabled, the desk set acknowledges MDC1200 emergency, status and message
messages. Only one desk set per system should be enabled to acknowledge emergencies, statuses and
messages. If disabled, no acknowledgment is generated for MDC1200 emergency, status and message
messages. See also Emergency Enable.
Emergency Alarm Enable
This parameter enables/disables the generation of emergency alert tones and the closure of the MDC
Emergency Relay. If enabled, the desk set, upon decode of a MDC1200 emergency generates a
continuous emergency tone and closes the MDC Emergency Relay, if available and programmed. If
disabled, no emergency tone is generated and no MDC Emergency Relay is closed. See also
Emergency Enable and Emergency Ack Enable.
Busy Timer Enable
This parameter, in conjunction with the Limited Patience Time, is used to determine if the loss of
receive audio activity is due to pauses in speech or is actually an opportunity to transmit data. Upon
pressing the
TRANSMIT
patience time is non-zero, the desk set waits for the receive activity to cease.
If during the limited patience time, the activity ceases and the busy timer is enabled, the desk set waits a
random amount of time to see if the receive activity remains inactive. If the receive activity remains
inactive, the unit then transmits the data. If the activity returns during the busy time, the limited patience
time is reverted to and the process repeated. During this time the operator may abort the transmission by
pressing the MDC button.
PC Control
This setting allows you to enter commands to the console from a personal computer.
button after the selection of a call type and target ID or alias, if the limited
63
Programming