Other Functions; Dtmf Pager/Code Squelch - Icom IC-3FGX Instruction Manual

245 mhz fm transceiver

Hide thumbs Also See for IC-3FGX:

Table of Contents

When you install optional the UT-108 DTMF DECODER UNIT into

the transceiver, DTMF pager function or code squelch function will

be available.

D D DTMF pager

This function uses DTMF tones for calling and can be used as a

"common pager" to inform you that one of your group has called

even if the operator is temporarily away from the transceiver.

• When the connection code is received, a beep sounds, then "

flashes and shows the called stations code number.

• Called stations code number are memorised automatically, and

are easy to re-call with "ID-MR select function".

D D Code squelch

This conveniently eliminates unwanted audio and is useful in group

activities or security related activities where unwanted output can

be a problem. The function is similar to a CTCSS tone squelch.

In order to use the above functions, cloning is necessary via a PC

using the optional CS-3FGX cloning software. Using this software,

the transceiver's model, individual RX Code CH, TX Code CH,

Special Tone Link2 (must be 'E') on 5Tone screen, 5Tone Signal-

ing Form on Memory-CH screen, Log, RX C-No, Key&Display,

Common AutoReset TimerB, and other settings related to opera-

tion can be set. Refer to the HELP file that comes with the CS-

3FGX

CLONING SOFTWARE

OTHER FUNCTIONS

for available settings.

Table of Contents