Gaggenau VG 421 Operation, Maintenance And Installation Manual

Gaggenau VG 421 Operation, Maintenance And Installation Manual

Gas cooker

Advertisement

Operation, Maintenance and Installation Manual
VG 421
Gas Cooker

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VG 421 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Gaggenau VG 421

  • Page 1 Operation, Maintenance and Installation Manual VG 421 Gas Cooker...
  • Page 2 Congratulations on buying your new “Vario” appliance. Before switching your appliance on for the first time, we would like you to familiarize yourself with your new appliance. In this manual you will find important notes on safety and operation. These will serve to ensure your personal safety and the lasting value of your appliance.
  • Page 3: Important Notes

    1. Important Notes For Your Safety Operating for the First Time You must not operate the appliance if it is damaged. Remove the packaging from the appliance and dispose of it according to local regulations. Be When connecting electrical appliances in the proxi- careful to remove all accessories from the mity of the appliance, make sure that connecting packaging.
  • Page 4: About Use

    In the event of malfunctions, please inform your Only use the burners after placing pots and specialist dealer or your nearest Gaggenau after- pans on them. Do not heat up any empty pots sales service.
  • Page 5: Features Of The Appliance

    2. Features Features of the Appliance 1 Appliance cover 2 Ventilation openings 3 Normal burner 2 kW 4 Large burner 4 kW 5 Pot grid 6 Control knob for front cooking zone 7 Control knob for rear cooking zone Control Knobs Flame setting: High setting of outer and inner flame ring Low setting of outer flame ring...
  • Page 6: Operating Principle

    3. Operating Principle The appliance features one-hand operation, flame detection and automatic re-ignition. The ignition is activated when the control knob is turned. Should the flame go out during operation, the appliance will automatically re-ignite the burner. During a disturbance, the appliance will cut off the gas supply as a safety measure, to prevent unburned gas escaping.
  • Page 7: Operation

    4. Operation Switching on Only light a burner if all burner parts are dry, and • Place a suitable pot or a pan on the corresponding assembled correctly. Otherwise, malfunctions may cooking position. occur or the appliance may switch off. •...
  • Page 8: Settings Table

    5. Settings Table Cooking Cooking method Examples level High Boiling Water Searing Meat Heating Fat, liquids Boiling Soup, sauce Blanching Vegetables Roasting Meat, fish, potatoes From Browning Flour, onions Roasting Almonds, breadcrumbs Baking Pancakes, egg dishes Boiling in open pot Liquids Simmering in open pot Dumplings, sausages, soup garnish,...
  • Page 9: Cookware Recommendations

    6. Cookware Recommendations Pots with a diameter of less than 90 mm or more VG 421 Recommended Minimum than 280 mm should not be used. When using large pot diameter pot diameter pots, pay attention to keeping to a minimum...
  • Page 10: Cleaning And Care

    7. Cleaning and Care The burners (burner head cover, burner ring and burner assembly burner head) will change their color during operation and become darker. This change in color will not influence the use-value. burner head Please thoroughly clean the appliance before cover operating it for the first time and after every use.
  • Page 11 (Order and polish the whole cooktop after cleaning No. 310631) from your Gaggenau to get an even stainless steel surface. dealer. Never allow food stains or salt to remain Caution: no liquid should enter on stainless steel for any length of time.
  • Page 12: Maintenance

    13 to see, if you can rectify the problem yourself. If your appliance still does not work, please contact your dealer or your local Gaggenau customer service agency. Specify the appliance type (see rating plate). Repairs may only be carried out by authorised technicians, in order to guarantee the safety of the appliance.

Table of Contents