IMPORTANT SAFETY INSTRUCTIONS read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
FUSE PROTECTION a mains fuse is provided in the IeC power inlet on the back of this apparatus, which can only be removed with the power cord unplugged. This must be replaced by a fuse of the same type and rating (see Specifications or refer to rear panel) IMPORTANT NOTICE FOR THE UNITED KINGDOM (CONNECTING THE PlUG AND CORD) The wires in the mains lead are coloured in accordance with the following code: Blue - neuTral Brown - lIVe as the colours of the wires in the mains cable may not correspond with the coloured markings identifying the terminals in...
If you suspect a problem with your subwoofer, please contact your local Tannoy dealer who will be able to advise on appropriate action. If you require further assistance, then we ask you to deal directly with your local Tannoy distributor.
CONNECTING TO YOUR SYSTEM alwaYs maKe anD CHeCK all ConneCTIons BeFore PluGGInG THe suBwooFer InTo THe maIns. Connection may be made either at lIne level, using the phono connectors on the back of the unit, or using the nearby speaker HI leVel terminals, which require bare wire or 4mm speaker plugs. FOR lINE lEVEl CONNECTION For use with an aV receiver or DVD receiver, connect a screened phono cable from the receiver suB output to either rIGHT or leFT low level phono input on the rear of the subwoofer.
40BF Power: 00FF Please refer to the instruction manual for your remote control or system controller, as Tannoy are not able to offer technical support in this matter. a dedicated remote control is not available. CARE OF CABINET Clean only with a soft dry cloth. The front speaker grille assembly is not removable.
11.81 x 11.81 x 11.02” 13.39 x 13.39 x 12.00” 14.37 x 14.37 x13.98” Enclosure Weight 9.3kg (20.5lbs) 12.1kg (26.7lbs) 16.7kg (36.8lbs) Mains Voltage 120V Nominal AC 60Hz, 230V Nominal 50Hz (Switchable) Maximum Power Consumption 312Va 475Va 810Va Mains Fuse 120V-T2al 250V 120V-T3.15al 250V 120V-T6.3al 250V 230V-T1al 250V 230V-T1.6al 250V 230V-T3.15al 250V NOTE: Tannoy adopts a policy of continuous improvement and product specification is subject to change without notice.
Need help?
Do you have a question about the TS Sub and is the answer not in the manual?
Questions and answers