The Search Method - One for All 6 User Manual & Code Book

If your device does not respond to the ONE FOR ALL 6
after you have tried all the codes listed for your brand, try
the Search Method. The Search Method may also work if
your brand is not listed at all.
Let's say you cannot get your ONE FOR ALL 6 to control
your Television:
1
2
3
4
5
To search for the code for your other devices, follow steps 1
through 5, only substitute the appropriate device key
during steps 2 and 4. For example, to search for the code
for your Video, press the VCR key; for your Satellite or
Cable Converter, press the SAT key; for your Amplifier,
press the AUX1 key, etc. Use the chart on page 9 for a
guide.
Note: If your device's original remote control does not
have a power key, press PLAY instead of POWER
when searching for your code.

The Search Method

Switch your Television on; any
programme is fine.
TV
Press the TV key on your ONE
FOR ALL 6.
Aim the ONE FOR ALL 6 at
your Television. Press and hold
down MAGIC until the ONE
FOR ALL 6's red light blinks
twice. Then, press 9 9 1. The
red light will blink twice.
Now, alternate between TV and
TV
POWER, over and over, until
your Television turns off.
You may have to press these keys
many times, so please be patient.
It could take up to 5 minutes.
Remember to keep pointing the
ONE FOR ALL 6 at your
Television when you press the
POWER and TV keys.
When your Television turns off,
press and release MAGIC.
Don't forget, press MAGIC as
soon as your Television turns off.
Now your ONE FOR ALL 6 is
ready to run your Television.
11