JK Audio ComPack User Manual page 9

FAQ's
?
How can I record my conversation?
!
The male XLR, in "Line Out" mode provides a nice mix of both sides of
the conversation.
?
How do I select which telephone interface I will be using (phone line,
PBX, or wireless)?
!
Actually, all three connections are live all the time. Technically, you could
connect to all three at once, but since there is no way to equalize levels,
this "conference call" might not be the best quality connection.
?
Will ComPack work with my model _______ cell phone?
!
As long as your wireless phone has a 3-conductor, 2.5 mm earpiece jack
and accepts a generic 3rd party earpiece or headset, you should be OK.
?
Can I talk on my cellular phone and record the conversation?
!
No, most phones detect the presence of anything plugged into the head-
set jack and immediately disable the phone's microphone and speaker.
?
What if my cell phone does not have a 2.5 mm headset jack?
!
Some phone manufacturers and many third party manufacturers sell
adapters that allow connection of a standard 3-conductor 2.5 mm plug.
You can often find these adapters where you purchased your phone, in
electronics stores or on the internet.
?
Can I send and receive audio at the same time?
!
Yes, but whatever audio you send into the ComPack will come back
mixed with the caller audio.
?
Will your ComPack provide phantom power for my condenser mic?
!
No, our devices will not provide phantom power. If you are connecting
your microphone directly to a ComPack, you should use a dynamic mic.
?
What is the Com Link used for?
!
Simply slide the Male XLR function switch to Com Link and you can con-
nect the ComPack Male XLR to your single channel beltpack intercom
system.
?
Can I connect the ComPack to a powered beltpack line?
!
Yes, the ComPack has a DC blocking cap so it will not be damaged if
connected to a powered line, although DC power is not necessary for
operation.
9