Winding / Setting Local Time - Chase-durer COMBAT COMMAND GMT Operation Manual

NOTE:
If your watch stops, it must be wound by turning the crown clockwise approximately 25 full
turns. Although the watch is automatic, the mainspring may not have enough reserve to keep it running
accurately. Once wound, the normal movement of wearing the watch will provide enough power to
keep accurate time.
2
Position of setting crown
is used for winding only
24
30
20
60
45 15
30
12
9
6
12
12
Setting crown in position
There are many accurate sources for this time signal including shortwave radio frequencies that
continuously announce GMT (UTC) and the internet.

Winding / Setting Local TIME

10
CHASE-DURER
31
COMBAT
COMMAND
AUTOMATIC GMT
3
*Note
the minute hand past the required time and turn backwards to
the desired minute.
4
Stops the Second Hand to allow synchronizing with a time signal.
Setting crown in position
used to adjust both hour and
minute
2 3
1
Date changes each
time hour hand passes
midnight (24:00 hours)
- For precise setting of time, it is recommended to adjust
4
is
hands*
4
2.