Table of Contents ® Display and Screw Down Crown/Pushbuttons ® Winding / Setting Local Time ® Setting Date and GMT ® Setting Second Time Zone ® Timing Mode • Chronograph Function ® Miscellaneous ® Specifications...
2nd Time Zone GMT hour hand 30 minute counter 60 second counter GMT hour marker Pushbutton: 2nd Time Zone marker START/STOP Date indicator CHASE-DURER COMBAT Setting crown COMMAND AUTOMATIC GMT Screwed Winding and Setting Positions 12 hour counter Down Screw Down Crown...
Position of setting crown Setting crown in position is used for winding only used to adjust both hour and minute hands* CHASE-DURER COMBAT COMMAND AUTOMATIC GMT Date changes each time hour hand passes midnight (24:00 hours) *Note...
Los Angeles. GMT is also referred to as Coordinated Universal Time (UTC) or Zulu Time (Z). Turn crown forward in position to set the Date Date changes each time hour hand passes midnight (24:00 hours) CHASE-DURER COMBAT COMMAND AUTOMATIC GMT Turn crown backward in position to set 24hour GMT...
24 hour format also. Minutes and seconds are read on the dial’s minute and second hands. Examples: Eastern Daylight Eastern Standard Time (EDT) Time (EST) CHASE-DURER CHASE-DURER COMBAT COMBAT COMMAND COMMAND AUTOMATIC GMT...
Timing Mode • Chronograph Function START WARNING: Before each time is taken, STOP the hands should be returned to their original position. CHASE-DURER Setting crown in COMBAT If necessary reset to zero COMMAND AUTOMATIC GMT position with pushbutton Reset to...
2.66 seconds 1 kilometer in 2.91 seconds To estimate the distance to an event (such as an explosion, muzzle flash, lightning, etc.), measure CHASE-DURER COMBAT the time from the visual flash to the sound and COMMAND AUTOMATIC GMT multiply the seconds by the per second speed.
Need help?
Do you have a question about the COMBAT COMMAND GMT and is the answer not in the manual?
Questions and answers