Advertisement
Table of Contents
- 1 Operation Manual
- 2 Table of Contents
- 3 Display and Setting Crown/Pushbuttons
- 4 Setting Time
- 5 Setting DATE, DAY of the Week, and MONTH
- 6 Resetting Chronograph Hands to Zero
- 7 Timing Mode • Simple Chronograph Function
- 8 Timing Mode • Split-Time or Intermediate Times Function
- 9 Miscellaneous
- 10 Specifications
- Download this manual
Advertisement
Table of Contents
Related Manuals for Chase-durer Conquest Chronograph
Summary of Contents for Chase-durer Conquest Chronograph
-
Page 1: Operation Manual
OPERATION MANUAL CONQUEST CHRONOGRAPH © Copyright 2007 CHASE-DURER LTD all rights reserved. -
Page 2: Table Of Contents
® Display and Setting Crown/Pushbuttons ® Setting Time ® Setting DATE, DAY of the Week, and MONTH ® Resetting Chronograph Hands to Zero ® Timing Mode • Simple Chronograph Function ® Timing Mode • Split-Time or Intermediate Times Function ® Miscellaneous ®... -
Page 3: Display And Setting Crown/Pushbuttons
WARNING: Crown must be in position 1 at all times, use position adjustments only. adjustments only. Do not operate pushbuttons under water! Do not operate pushbuttons under water! and Setting Crown/Pushbuttons CHRONOGRAPH HANDS CHRONOGRAPH HANDS CHASE-DURER CHASE-DURER 2 for 2 for MONTH Display MONTH Display Setting button E Setting button E... -
Page 4: Setting Time
60 mark. This will stop the watch and allow you to set the minute and hour hands a couple of minutes ahead of the correct time. Using an accurate time reference, push the setting crown back to position when the time reference reaches the set time. -
Page 5: Setting Date, Day Of The Week, And Month
DAY of Week MONTH Setting button D Setting button E CHASE-DURER Setting button C DATE NOTE - Single button press advances by one position; continued pressing will advance position rapidly. -
Page 6: Resetting Chronograph Hands To Zero
2. Push in and hold buttons & 360° to indicate you are in corrective mode. CHASE-DURER Note: Pressing PUSHBUTTON A momentarily will advance hands in single steps. To advance hands continuously, press PUSHBUTTON A longer than 1 second. for all adjustments for at least 2 seconds;... -
Page 7: Timing Mode • Simple Chronograph Function
Timing Mode • Simple Chronograph Function CHASE-DURER ADD FUNCTION: Order in which pushbuttons should be pressed. Steps be repeated as often as necessary. Pressing readings and reset chronograph hands to zero. START STOP Read Steps START STOP Reset to Zero... -
Page 8: Timing Mode • Split-Time Or Intermediate Times Function
Timing Mode • Split-Time or Intermediate Times Function order of functions CHASE-DURER CHASE-DURER RESTART (catching up) Note* Step as necessary; Step START CHASE-DURER Crown set in position 1 SPLIT 1 Read TIME 1 0 hour CHASE-DURER 15 minutes 26 seconds... -
Page 9: Miscellaneous
17.4s x 1,129ft 17.4s x 17.4s x 17.4s / 4.68s 4.85 seconds 17.4s / 2.66s 2.75 seconds 17.4s / 2.91s 3.01 seconds CHASE-DURER ° 68 F = 19,644ft 376yds = 6,542yds 344m = 5,986meters = 3.72 miles = 6.54 thousand yards... -
Page 10: Specifications
CONQUEST CHRONOGRAPH Technical Specifications ® SWISS Made, precision RONDA 5040.F quartz movement. ® Chronograph: 1/10th second, 60 seconds, 30minutes elapsed time and split time. ® Date, Day of Week, and Month displays. ® Super-LumiNova advanced illumination system on hands. ®... - Page 11 RONDA Cal. 5040.F (CONQUEST CHRONOGRAPH) CHASE-DURER 9601 Wilshire Blvd. #1118 Beverly Hills, CA 90210 USA Tel: 800.544.4365 / 310.550.7280 Fax: 310.550.0830 E-mail: Customer-Service@Chase-Durer.com www.chase-durer.com © Copyright 2007 CHASE-DURER LTD all rights reserved.
Need help?
Do you have a question about the Conquest Chronograph and is the answer not in the manual?
Questions and answers