Playback; Preparations; Turning The Power On; Selecting The Input Source - Denon AVR-2808 Owner's Manual

SOURCE SELECT
<SOURCE> SPEAKER
<POWER> <PHONES>
<ON/STANDBY>
[ AMP]
[POWER ON]
[MUTE]
SOURCE SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
MASTER VOLUME

Playback

Preparations

Turning the Power On

1
<POWER>
Press
The power indicator lights red and the power is set to the standby
mode.
2
<ON/STANDBY>
Press
The power indicator flashes green and the power turns on.
To operate the AVR-2808 using the main remote control unit, set the
remote control unit to the AMP mode
Unit Operations").
Turning the Power Off
q Press <ON/STANDBY> or [POWER OFF].
The power is set to the standby mode.
w Press <POWER>.
SPEAKER
The power indicator turns off, and so does the power.
[POWER OFF]
NOTE
Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long periods
of time or when traveling, either press <POWER> to turn off the power,
or unplug the power cord from the power outlet.
MASTER VOLUME

Selecting the Input Source

Operation on the Main Unit
<SOURCE SELECT>
Turn
If "Rec Select" or "Video Select" is selected for the input source,
press <SOURCE> before turning <SOURCE SELECT>.
.
[POWER ON].
or
(vpage 51 "Remote Control
.
Operation on the Main Remote Control Unit
[SOURCE SELECT]
Press .
The desired input source can be selected directly.
To operate the AVR-2808 using the main remote control unit, set the
remote control unit to the AMP mode (vpage 51 "Remote Control
Unit Operations").

Operations During Playback

Adjusting the Master Volume
<MASTER VOLUME>
Either turn
VOLUME]
.
Turning Off the Sound Temporarily (Muting)
[MUTE]
Press .
To cancel, press [MUTE] again. Muting can also be canceled by adjusting
the master volume.
Listening with Headphones
<PHONES>
Plug the headphones into
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
Be careful not to set the volume too high when using headphones.
Switching the Front Speakers
SPEAKER
Press .
Front A Front B
Front A+B
ENGLISH
[MASTER
or press
.