Operating The Sub Remote Control Unit - Denon AVR-A100 Owner's Manual

Av surround receiver
Hide thumbs Also See for AVR-A100:
Table of Contents

Advertisement

Setting the display time length of the
remote control unit display
Use the following procedure to set the length of time for which to
display data such as zone and mode on the display panel of the remote
control unit.
1
Press and hold
POWER ON
and
ZONE/DEVICE ON
for at least 3
seconds.
"SETUP" flashes twice on the remote
control unit.
2
Use ui to display "LCD" on
the remote control unit and press
ENTER
.
3
Use ui to set the display time
length and press
ENTER
.
"SET" flashes four times on the remote
control unit and the normal operation
mode is restored.
Remote control unit display
05SEC
10SEC
15SEC
30SEC
The backlight of the remote control unit lights for 10 sec.
Restoring all settings of the remote control
unit to default
Use the following procedure to restore all default settings of the
remote control unit at the time of purchase.
1
Press and hold
ZONE/DEVICE ON
seconds.
"SETUP" flashes twice on the remote
control unit.
2
Use ui to display "RESET" on
the remote control unit and press
ENTER
.
3
Use ui to display "ALL" on
the remote control unit and press
ENTER
.
4
Use ui to display "YES" on
the remote control unit and press
ENTER
.
Display time
"RESET" flashes four times on the
5 sec
remote control unit and the normal
10 sec
operation mode is restored.
15 sec
30 sec
Operating the main remote control unit
POWER ON
and
for at least 3
Operating the sub remote control
unit
• The sub remote control unit is equipped with frequently used
buttons, so it can be used for simple remote control unit operations.
• The sub remote control unit can also be used for multi-zone, so you
can use it to control this unit from other rooms.
• The operations listed below can be performed with the sub remote
control unit.
• Switching the input source
• Adjusting the volume
• SIRIUS, HD Radio and iPod operations
• NET/USB direct play
• Menu operations
• Zone power on/off
• It is not possible to operate devices other than the amplifier.
NOTE
This unit cannot be used in the ZONE4 mode.
DIRECT PLAY button
• Playback is possible in the mode selected at menu "Direct Play".
FAVORITES
Playback starts from the first track registered in the favorites.
ALL MUSIC
Playback starts from the first track registered in the "Music" folder.
USB
• When
is pressed, playback starts from the first track on the
USB memory device.
NOTE
When the media server is stopped or restarted, it may no longer be
possible to play tracks stored in the favorites.
ENGLISH
115

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents