Connecting A Cd Player; Connecting An Antenna; Am Loop Antenna; Fm Indoor Antenna - Denon AVR-1911 Owner's Manual

Connecting a CD player

• You can enjoy CD sound.
• Select the connector to use and connect the device.
Cables used for connections
Audio cable (sold separately)
(White) L
Audio cable
(Red)
R
CD player
AUDIO
AUDIO
OUT
L R
L R
L R
in Set as Necessary
Set this to change the digital input connector to which the input
source is assigned.
"Input Assign" (vpage 46)

Connecting an antenna

• Connect the FM antenna or AM loop antenna supplied with the unit to enjoy listening to radio broadcasts.
• After connecting the antenna and receiving a broadcast signal (vpage 24 "Listening to FM/AM broadcasts"), fix the antenna with tape in a
position where the noise level becomes minimal.
FM outdoor
L
antenna
R
75 Ω Coaxial
cable
FM indoor
antenna
(supplied)
Ground
n AM loop antenna assembly
1
Put the stand section
through the bottom of
the loop antenna from
the rear and bend it
forward.
2
Insert the projecting part
into the square hole in
the stand.
q w e
n Using the AM loop antenna
Suspending on a wall
AM outdoor
Suspend directly on a wall without assembling.
antenna
Standing alone
Stand
Square
Use the procedure shown left to assemble.
hole
Loop
Projecting
antenna
part
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.
• If the signal has noise interference, connect the ground terminal
(GND) to reduce noise.
• If you are unable to receive a good broadcast signal, we recommend
installing an outdoor antenna. For details, inquire at the retail store
where you purchased the unit.

AM loop antenna

(supplied)
Black
White
Nail, tack, etc.
ENGLISH
19