Resetting The Microprocessor; Specifications - Denon AVR-1911 Owner's Manual

Hide thumbs Also See for AVR-1911:
Table of Contents

Advertisement

ENGLISH

Resetting the microprocessor

Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
ON/STANDBY
1
ON/STANDBY
Turn off the power using
2
Press
ON/STANDBY
while simultaneously pressing
SURROUND MODE 1
.
3
Once the display starts flashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
80
SURROUND MODE 1
SURROUND MODE 0
.
SURROUND MODE 0

Specifications

n Audio section
• Power amplifier
Rated output:
Output connectors:
• Analog
Input sensitivity/Input impedance:
Frequency response:
S/N:
n Video section
and
• Standard video connectors
Input/output level and impedance:
Frequency response:
n Tuner section
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N (IHF-A):
Total harmonic Distortion (at 1 kHz):
n General
Power supply:
Power consumption:
Maximum external dimensions:
Weight:
n Remote Control Unit (RC-1146)
Batteries:
Maximum external dimensions:
Weight:
For purposes of improvement, specifications and design are subject to change without notice.
Front:
90 W + 90 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Center:
90 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround:
90 W + 90 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround back:
90 W + 90 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
6 – 16 Ω
200 mV/47 kΩ
10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
100 dB (IHF–A weighted, DIRECT mode)
1 Vp-p, 75 Ω
5 Hz – 10 MHz — +1, –3 dB
[FM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10
–15
W)
87.5 MHz – 108.0 MHz
522 kHz – 1611 kHz
1.2 μV (12.8 dBf)
18 μV
MONO 2.0 μV (17.3 dBf)
STEREO 42 μV (34.5 dBf)
MONO 72 dB
STEREO 67 dB
MONO 0.3 %
STEREO 0.7 %
AC 230 V, 50 Hz
460 W
0.1 W (Standby)
3 W (CEC standby)
434 (W) x 171 (H) x 381 (D) mm
10.2 kg
R6/AA Type (two batteries)
53 (W) x 224 (H) x 28 (D) mm
160 g (including batteries)
[AM]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents