Table of Contents
Advertisement
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
8.
To connect to non-HCI sets.
A.
Locate the DVD player close to the set. The connecting cables must be able to reach the input jacks of the
set.
B.
Connect the DVD player to the TV using one of the following outputs on the back of the DVD player.
The TV must have a corresponding input.
If using the coax connector, connect the incoming coax to the RF IN coax connector and the RF OUT coax
connector to the TVs RF IN connector. (tuner) To watch a DVD, tune the TV to channel four. NOTE:
When the DVD player is on, the TV will not receive normal TV channels. To return to normal TV
viewing, turn the DVD player off.
SUPPORTED FORMATS
CD PLAYER
VCD, SVCD, DVD, MP3, MP4, JPEG, HDCD, CDDA, WMA, CD-G, CD-RW, DVD-R, DVD+R, DVD-RW, DVD +RW,
HDVD and Kodak Picture CD.
USB FLASH DRIVE AND SD/MS/MMC MEMORY CARD
WMA, AVI, MP3, DIVX, MPEG 4, DIVX3.11, DIVX4.X and DIVX5.X.
A.
HDMI
B.
COMPONENT
C.
S-VIDEO
D.
COMPOSITE (A/V)
E.
COAX (RF-CH4)
HealthCare Information, LLC
Best picture and sound quality
Excellent picture and sound quality
Good picture and sound quality
Common picture and sound quality
Common picture and sound quality
7
Advertisement
Table of Contents
