Table of Contents
Advertisement
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
OPERATION
RoomMate TV
1. Turn the TV and DVD player on.
2. Use the "SOURCE" or "INPUT" buttons to select the DVD input source. Normally this will be the HDMI
input of a RoomMate set. The input source may be renamed DVD. See the RoomMate Operations Manual to
rename the source. The component, S-Video or audio/video inputs may also be used but the picture quality
will not be as good as using the HDMI port.
3. Insert a DVD into the slot. Printed side faces the top of the DVD player. Push the DVD gently and slowly in
to the slot until the DVD player takes it.
4. If the DVD has no menu content the DVD will start to play automatically. If the DVD contains menu content,
use the menu navigation buttons to select the main title and press the "ENTER" or "PLAY" button.
5. When the DVD is finished, press the "EJECT" button and retrieve the DVD. Do not pull the DVD out of the
player until it is finished ejecting.
**NOTE: When you play the DVD disc, if you want to skip the warning and the advertising, you can press the STOP button
twice followed by PLAY button to directly access to DVD content.
Other TV
1. Turn the TV and DVD Player on.
2. Set the TV to the input source the DVD player is connected to.
3. Insert a DVD into the slot. Printed side faces the top of the DVD player. Push the DVD gently and slowly in
to the slot until the DVD player takes it.
4. If the DVD has no menu content the DVD will start to play automatically. If the DVD contains menu content,
use the menu navigation buttons to select the main title and press the "ENTER" or "PLAY" button.
5. When the DVD is finished, press the "EJECT" button and retrieve the DVD. Do not pull the DVD out of the
player until it is finished ejecting.
HealthCare Information, LLC
12
Advertisement
Table of Contents
