Table of Contents
Advertisement
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
ADVANCED SETUP
Use one of the following methods to access the setup menu.
1.
Press the rewind (left) and fast forward (right) buttons on the front panel at the same time.
2.
Using a RoomMate IR remote press and release the "SETUP" button followed by the "1" button and then the
"2" button.
3.
Press the menu button on the DVD IR remote. NOTE: The DVD player default IR remote is set for a
RoomMate IR remote. See page 17 to change the IR remote setting.
4.
Use the "UP", "DOWN", "LEFT" and "RIGHT" arrow buttons to navigate the menus. Press the "ENTER"
button to make selections.
5.
To return to the MENU selection bar press the "LEFT" arrow button.
6.
Press the "SETUP" button on a RoomMate IR remote or the "MENU" button on the DVD remote to exit setup
mode. Setup mode will also time out if no buttons are pressed.
SOFTWARE VERSION
To check the software version number of the DVD player, enter the setup menu per above instructions then using and IR remote,
press and release number buttons "1, 3, 8, 9" one at a time. Software version information will be displayed. Press the
"ENTER" button to exit version display. Setup menu will then be displayed.
MENUS
1.
General Menu
HealthCare Information, LLC
13
Advertisement
Table of Contents
