Video Menu; Component; Resolution; Quality - HCI -DVD2 Operation Manual

----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
4.

Video Menu

Component

Resolution

Quality

HDMI Setup

Selects component YPBr output or S-video output. Both outputs can not be active
at the same time. Selections are:
S-Video – YUV
YUV – Component
Sets output resolution. Selections are:
480I – 480P – 720P60 – 1080I60 – 1080p(60Hz) – 576I - 576P – 720P50 – 1080I50
1080p(50Hz)
Video setup

Sharpness

Adjusts picture sharpness. Selections are:
High – Medium – Low

Brightness

Adjusts picture brightness. Press "ENTER" to exit. Selections are:
-20 to +20

Contrast

Adjusts picture contrast. Press "ENTER" to exit. Selections are:
-16 to +16

Gamma

Sets Gamma correction. Selections are:
None – Low – Medium – High

Hue

Adjust color tone. Also know as tint. Press "ENTER" to exit. Selections are:
-9 to +9

Saturation

Adjusts color level. Press "ENTER" to exit. Selections are:
-9 to +9

Luma Delay

Adjusts the delay between the Luminance and chroma signals. Selections are:
0 T – 1 T
Setup for the HDMI output.

HDMI

Turns HDMI output on or off. Selections are:
On – Off

Audio Source

Selects HDMI audio source track to playback from on a DVD. Selections are:
AUTO - PCM
HealthCare Information, LLC 16