Pillow Speaker Control; Tv Setup For Pillow Speaker Control - HCI -DVD2 Operation Manual

----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL

PILLOW SPEAKER CONTROL

Any digital pillow speaker with number buttons can be used through an HCI RoomMate television to control the DVD player.
Pillow speakers with custom HCI overlays with DVD functions printed on the button pad are available from both Curbell and
Anacom Medtek.
When the HDMI, Component or Composite input is selected on the RoomMate TV (usually the HDMI input) the number buttons
on the pillow speaker are used for DVD control. When the TV is in TV or DTV mode, the number buttons function normally.
For the pillow speaker to be able to control the DVD player, a six conductor RJ-11 cable must be connected from the TV serial
control port (labeled SER) to the DVD serial control port. Serial control in the TV "ADVANCE" menu must be set to "DVD"
BUTTON FUNCTIONS
1 EJECT
2 FAST FORWARD, MENU CHOICE UP
3 STOP
4 PLAY PREVIOUS TITLE, CHAPTER OR TRACK, MENU CHOICE LEFT
5 PLAY/PAUSE, MENU ENTER
6 PLAY NEXT TITLE, CHAPTER OR TRACK, MENU CHOICE RIGHT
7 DVD DISC MENU
8 FAST FORWARD, MENU CHOICE DOWN
9 DVD TITLE MENU
GENII IPTV SETUP FOR PILLOW SPEAKER CONTROL
1. Enter the setup menu. (Function 0, 9999)
2. Go to the SYSTEM menu
3. Select SERIAL CONTROL
4. Set SERIAL CONTROL to DVD
5. Exit Setup menu.
Curbell pillow speaker
with custom HCI overlay
HealthCare Information, LLC 11