----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL PACKAGE CONTENTS After opening, carefully check the package contents: DVD player Operation Manual HDMI Cable POWER Cord 3`RCA Cable Set Foot Pads Mounting Screws M4*8 Philips Pan Head Black Washer RJ11Data Cable IR Remote HealthCare Information, LLC...
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL SAFETY PRECAUTIONS WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and this apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not use this apparatus near water.
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with soft dry cloth. For heavy contamination a soft cloth dampened with a mild soap solution may be used. Do not block any ventilation openings.
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL IMPORTANT SAFETY INSTRUCTIONS Do not use a Do not touch Insert the plug defective power the power cable in to the socket cable. with wet hands. firmly. Switch off the player, Unplug the apparatus Disconnect player If the cable plug wires if the device is wet.
Using 4pcs 1/4`` lag bolts fasten the DVD player onto wall or flat surface. Mounts are available to mount the DVD player directly to an HCI RoomMate series TV. Mounts are available for left, right and bottom mounting. Contact your dealer for more information and part numbers. For these mounts, follow the directions that are included with the mount to mount the DVD player to the TV.
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL To connect to non-HCI sets. Locate the DVD player close to the set. The connecting cables must be able to reach the input jacks of the set. Connect the DVD player to the TV using one of the following outputs on the back of the DVD player.
8. ZOOM 9. SUBTITLE 10. REPEAT 11. ROOT MENU 12. FORWARD 13. NEXT 14. STOP IR REMOTE (HCI TV AND DVD) 1. POWER POWER ON/OFF 2. MUTE TURNS SOUND ON AND OFF 3. VOLUME UP INCREASES SOUND LEVEL 4. SOURCE SELECTS INPUT SOURCE (DVD/ USB/ CARD) 5.
Page 11
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL UNIVERSAL IR (IR4) Universal remotes should be set for a Broksonic DVD player. POWER POWER ON/OFF 2. NUMBER BUTTONS DIRECT ACCESS TO TRACKS 3. ENTER CONFIRM THE OPTION 4. MENU RETURN TO ROOT MENU 5. CHANNEL UP PREVIOUS TRACK 6.
PILLOW SPEAKER CONTROL Any digital pillow speaker with number buttons can be used through an HCI RoomMate television to control the DVD player. Pillow speakers with custom HCI overlays with DVD functions printed on the button pad are available from both Curbell and Anacom Medtek.
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL OPERATION RoomMate TV 1. Turn the TV and DVD player on. 2. Use the “SOURCE” or “INPUT” buttons to select the DVD input source. Normally this will be the HDMI input of a RoomMate set. The input source may be renamed DVD. See the RoomMate Operations Manual to rename the source.
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL ADVANCED SETUP Use one of the following methods to access the setup menu. Press the rewind (left) and fast forward (right) buttons on the front panel at the same time. Using a RoomMate IR remote press and release the “SETUP” button followed by the “1” button and then the “2”...
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL TV Display Sets the aspect ratio (width to height ratio) of the picture. Selections are: 4:3/PS - 4:3/LB – 16:19 Pan and Scan Letter Box Angle Mark Allows viewing of scenes from different angles. DVD must be recorded with different angles for this function to operate.
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL Post DRC Dynamic Range Compression. Lower the dynamic range (volume difference between high and low levels) for better playback quality on low quality stereo systems. Selects post DRC mode. Selections are: On – Off – AUTO Spdif Setup Digital audio output setup.
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL Video Menu Component Selects component YPBr output or S-video output. Both outputs can not be active at the same time. Selections are: S-Video – YUV YUV – Component Resolution Sets output resolution. Selections are: 480I – 480P – 720P60 – 1080I60 – 1080p(60Hz) – 576I - 576P – 720P50 – 1080I50 1080p(50Hz) Quality Video setup...
Universal IR remote Broksonic codes. NOTE: The DVD player will always respond to an RoomMate IR remote is the player is connected to an HCI RoomMate television via the serial port. Serial control in the TV “ADVANCE” menu must be set to “DVD”...
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL Parental Sets the parental control rating. Any content rated above the set rating can not be viewed. Selections are: KID SAF – G – PG – PG 13 – PGR – R – NC17 – ADULT Password Sets password mode and password.
As a condition to obtaining warranty service, notification must be given to the dealer the product was purchased through within at least 10 days after defect is first observed. Repair of product requires it to be shipped to HCI in Loveland, Ohio. All shipping and freight charges to HCI shall be paid for by the customer and will not be accepted without a Return Merchandise Authorization Number (RMA#).